Cutting and Pasting?

[phoenix]

Hi sagefemme,

I can’t help worrying, however, about the split layer on top. I do not want to sense the divide, I guess. I know there is at least one thread on this site about whether the split is detectable, and if you CAN feel it, does it really bother anyone. Somehow I have the idea that having at least one layer that is continuous would contribute to the mattress feeling more “together.” Maybe it doesn’t even have to be the top layer.

You can read about split layers in post #2 here. While you can feel the different firmness levels on each side of the split … with a suitable quilted cover or with a solid layer on top of any split layers with a stretch cover you won’t feel the split itself.

On to my question. If I ended up with two split layers and one continuous, and later wished they were all split, how difficult is it to cut a layer myself?

It’s not difficult at all especially with thinner layers (around 3" or less). All you need is an electric carving knife and a straight edge for a guide and just go carefully and slowly and move the knife in one direction (not a sawing motion). There are some good instructions for cutting and gluing latex in post #3 here

Conversely, and maybe more crazily, can a split layer be glued successfully so that the split can’t be felt if you are lying on it (or doing something else on it…)?

While it’s not likely to be necessary, you can glue split layers back together with the right spray glue such as here or here (or it is available from any foam or fabric shop). You would need to be careful to align the layers together so all the edges are flush because latex is very “squishy” and stretchy.

Phoenix