Hello, first time poster but spent lots of time researching and reading posts in this forum, would love some insight:
Quick sleep profile:
Myself: Mostly back sleeper, sometimes side, concerned for lower back support
Partner: Mostly side sleeper, sometimes back
We thought we preferred firm bed sleepers, but after testing we see ourselves perhaps more mid-soft or mid-firm.
Previous mattress was a Serta iSleep Oracle ~10 years - no longer provides proper back and hip support.. (probably kept it a few years too many)
I am based in the Montreal, Canada area, and went to Matelas Bonheur as per previous posts recommending Green Sleep but was informed they no longer carry this brand and only have floor demos left at this point so we tried other brands.
At first we were interested in the Zedbed Nature Baltika 3.0 but my partner wasn’t overly convinced, so we tried a few others and landed on the Technogel Verona Hybrid Mattress as by far and away our favourite. However, after returning home and doing some research, it seems as though customers seemed to have heating issues and support/sagging issues long term with this brand (no info on this specific mattress).
We also tried today the Casper Wave Hybrid snow but Casper seems to also have a bit of a mixed history of good and bad.. Does the Hybrid mattress with the flex coils make it more durable and less likely to sag long term?
my questions would be:
In regards to the Technogel Verona:
Does anyone have experience with the heating issues? Are the concerns overblown? Is it similar to my old mattress with foam or worst?
Would I have less likeliness for support/sagging issues as the mattress I am interested in is a hybrid mattress with pocket springs?
Is it worth considering trial’ing it despite the hefty price tag knowing that i am worried about long term issues?
In regards to a Latex mattress
Are there other options I should look at? I can’t find any Green Sleep elsewhere
The Zedbed seems like it would be ok, but what other Latex brands can I try locally
The Casper seems to be a good fit as well but anecdotally seems to have long term questions, but does a hybrid technology make it more durable?
I’ve considered DIY but it would be the last option I would like to try more in person before going down that route.
Analysis paralysis mode is a pretty common stop on the mattress journey! So…you’re not alone there.
With regards to the Technogel Verona Hybrid, the comfort can feel really good initially, but you’re right to notice the concerns around heat and long-term support. Gel layers can sometimes trap warmth despite the cooling claims, and the foams used underneath tend to be the weak link if densities aren’t disclosed. If you and your partner are lighter-weight sleepers, you might get more mileage, but at 215 lbs combined with side sleeping, I’d be cautious. The springs will help with durability compared to an all-foam build, but the comfort layers are still where sagging or softening usually shows up first.
If you’re leaning toward latex, that could give you more consistent support and longevity. Green Sleep is tough to find these days, but in Montreal you may be able to test Zedbed, Obasan, or Essentia for latex builds. SleepEZ or DIY options could also be worth exploring later if you don’t mind some hands-on involvement.
Casper’s Wave Hybrid Snow has the zoned coils and foam layers, which makes it feel supportive at first, but the lower-density foams historically used in their builds mean it may not last as long as a true latex hybrid. Hybrids in general do better than all-foam on support, but they’re still only as strong as their upper layers.
If budget and convenience allow, trialing the Verona could give you clarity, but I’d weigh that against the risk of paying a premium for materials that may not hold up. A good latex hybrid (if you can find one locally) should give you the pressure relief for side sleeping while keeping your lower back aligned, which seems to be the sweet spot you’re after.
Hope that helps give some context and I’d love to hear if any of our Canadian DIY folks here have tried blending components and how they’ve gone about it!
Thank you for the advice. In the end, I found a local DIY mattress manufacturer and chose a customized a Talay Latex mattress which although not as comfortable as the Verona, was the second best of all the options after customizing the firmness and came out slightly cheaper (but I am thinking it will last longer too)
Glad you were able to find something that worked for you. I think the customization aspect is probably the biggest advantage with these types of mattresses, especially when two people have different sleeping positions and comfort preferences. This thread actually highlights something I’ve noticed with some Quebec manufacturers. A lot of them seem to take more of a custom-build approach instead of putting everyone into the same few standard models. Matelas Personnel is one example that offers things like custom mattress builds, different firmness options, and latex options, which seems to fit people who need something more specific. I think Talalay latex is interesting because the material itself has a strong reputation, but the final feel probably depends just as much on the layering, firmness, and how the mattress is built around the sleeper. Now that you’ve chosen a customized Talalay mattress, do you think being able to adjust the firmness and feel was the main reason it worked better for you compared with the ready-made options you tested?
