I’ve almost pulled the trigger on two local factory direct companies (Holder bedding and may mattress …aka scandinavian sleep systems). Now I’m starting to think the Aloe Alexis is a much better value. Anyone other than thrilled with their mattress from BB? It’s just that I can’t find one negative comment anywhere and that’s usually hard to do when you’re talking about the interweb. Maybe they’re just that good…
Hi Kmfl98,
I doubt that you will find many people if any at all that are unhappy with the quality or value of the mattresses they’ve purchased from BB because like all the members here they are completely transparent about what is in their mattresses which means you can know and assess the quality and value before you buy it. Of course quality and value have little to do with the suitability of a mattress or the comfort choice they make and there will always be some smaller percentage of people who are unhappy with their comfort choice with any online purchase. This is just part of the risk of any online mattress purchase vs a local purchase that you can test first but the risk of this can also be lowered by choosing a mattress that has exchange options either for one or more layers or the mattress itself.
Like all the members here (and some others that aren’t members as well) … they aren’t “perfect” but they really are “that good” and are among the best of the best in the country 
Phoenix
Yes there are always going to be that small perceentage…which is why I’m surprised I can’t find any complaints. Those people always seem to like to make their experiences well known if you know what I mean. Maybe BB hasn’t been selling these mattresses very long? Maybe the sample size isn’t large enough to have these unsatisfiable individuals. I’m probably going to go with them so I am hoping they are just “that good”. I’m so glad I found this website so I’m making the decision between good and good. Thanks Pheonix!
Hello, first time poster.
I am also considering a purchase from BB. I received good advice through their chat service. I am undecided between their memory foam and latex toppers. So, I have a question if anyone knows, when it says “4 lb memory foam”, or 5 lb memory foam, etc., (on the BB site) they are referring to the density per cubic foot?
One would assume so, but I had read that it should always have the word density in the title when it is referencing foams. I will definitely ask them directly, but wanted to know if anyone knows for sure.
Hi whimzee,
Yes … what they list is the density per cubic foot of the foams they use. This is standard terminology in the industry but you’re right that there are some less reputable dealers who will use the same “words” to mean something else (such as density per 2 cubic feet) in an effort to mislead people.
Phoenix
I just placed an order with Brooklyn Bedding a little while ago. I contacted them by email several times and they were very helpful and answered all my questions promptly (Jacob was the name of the sales rep). I ordered their 10" all natural latex (Talalay) mattress. I thought Dunlop would suit me better but Jacob pointed me more in the direction of the Talalay. He also told me a number 5 (cushion firm) would be best for me. I told Jacob I was a member here and he also gave me a mattress underground code for nearly $100 off just because I am a member of this forum. As Phoenix has said repeatedly, if a company is part of the “underground”, they are among the best of the best. I’ll report back once I get the mattress which will be delivered by FedEx in about two weeks.
I want to edit this because I forgot to mention that today I also purchased the Ergo Advanced mechanical bed frame under the Tempur-pedic label at a local store that includes delivery, set-up and haul off of my old bedding. I wanted the Reverie Deluxe, however, no one sells them locally and I don’t trust third party shippers used by internet stores. Also, the Ergo model is being discontinued and they were selling it at a very good price. From everything I’ve read here this base is about the same as the Deluxe. Again, I’ll report back when I have all this set up in a couple weeks. I want to mention I had also been looking at the L&P S-cape but the extra two leg supports and the added ten degrees of head adjustment swayed me towards the Ergo/Deluxe.
Kmfl98,
I also am looking at BB. It’s a little difficult to order online, which is sad because my area doesn’t have many quality, non-chain mattress dealers.
For example, the salesman at BB informed me their mattresses have a 1" pillow top quilting (though curiously their website says it’s 1.5"…). I personally feel like that’s a LOT of cushion, and might take away from the feel of the mattress. After all, the idea is to have the thing conform as best as possible to your body to ease pressure points. Also I’m a bit burned after my Sealy pillow top mattress caved in in the middle, to the tune of 1.25" (as measured by a warranty agent… .25" more and I could have replaced it) in the first 6 months. So the words pillow top make me cringe.
But that aside, it’s difficult to buy online for other reasons. Ex: how will a “firm” v. “medium” latex support layer feel with memory foam? What about how each will feel with 4lb vs. 5lb foam? and compare that to “firm” v. “cushion firm” of a latex-only mattress? I’m curious how you are analyzing decisions like this. At some point, doing all the research in the world is no substitute for a showroom where you can lay on the offerings side by side. The salesman told me if I’m worried about body indentations to go with their “cool” mattress series (which, conveniently, is the most expensive line they have). But I feel like at 150 pounds I shouldn’t have to worry about my mattress caving in like my current one does! Might have to check some of the other members on this website.
I have the Cool Luxe from them. So far all good with them. Quick delivery and great communication. The real test will be if I decide to return it.
I had a latex mattress from Sleep EZ which I did return and they were excellent to work with. FIrst rate company.
Comment deleted by user.
[quote=“jet757f” post=19117]I have the Cool Luxe from them. So far all good with them. Quick delivery and great communication. The real test will be if I decide to return it.
I had a latex mattress from Sleep EZ which I did return and they were excellent to work with. FIrst rate company.[/quote]
Also, why are you thinking about returning the Cool Luxe? Thanks!
Hi michaelbw,
I’m not jet757f of course but you can read the thread about their SleepEz mattress here.
Phoenix
PS: I’ve switched both of these posts to jet757f’s thread to keep this one on topic.
Hi milacqua,
Thanks for your comments and feedback … and congratulations on your new mattress and adjustable bed :0
I’m looking forward to your comments when you receive them.
Phoenix
Thanks for the well wishes and also for all of your advice and help. Without you and the others here I would have been like a fish out of water with this stuff. One never knows for sure of course but I feel that with the information I have gained here in just a week’s time that I made good, intelligent choices for my needs. Anyone serious about a good night’s sleep needs to visit the Mattress Underground.
Hi JDMWDC,
This is not actually a “pillowtop” layer (which is very different) but a quilting layer which is compressed with the quilting design. They also have different mattresses which use different amounts of quilting foam and other materials as well (such as wool) depending on the mattress and on the “feel” that the design goal is meant to achieve.
Once you get into the range of about 2" or more then I would be cautious (and the Sealy Pillowtops nave much more than this) but in this range it’s there to fine tune the feel and performance of the mattress. You can read a bit more about quilting layers in post #2 here and the post it links to.
As you are pointing out … ordering a mattress online can have some extra risk involved. You can read about some of the pros and cons of local vs online (which of course is an ongoing discussion) in this thread as well as post #2 here. Good local testing on similar materials or designs can certainly be helpful to reduce the risk. Some online mattresses are also made to be similar in “feel” and performance to some mattresses (such as Tempurpedic) that are widely available locally which can then be used for local testing as an approximation. In other cases … exchange or return policies (either for a mattress or for individual layers) can also reduce the risk substantially because then your own sleeping experience can be used for “testing”.
What you were told is also correct that higher quality and density foams are also more durable (and logically they are also more costly as well of course). You can read more about the many factors that are involved in durability in post #4 here (and the post it links to as well).
As in all things connected with mattresses … the parts of each person’s “personal value equation” that are most important and each person’s risk tolerance and the tradeoffs they are happy to make can be quite different.
Phoenix
Well I pulled the trigger today and bought the Aloe Alexis. I’ll probably start another thread with my experience.
Hi Kmfl98,
You certainly made a great choice and I think that the Aloe Alexis with its two latex layers is one of their most popular mattresses.
Congratulations on your new mattress
I’m looking forward to your feedback when you receive it and have had a chance to sleep on it.
Phoenix
Phoenix,
What’s the rule with regard to “sink in” of the memory foam? I’m having difficulty determining if the Aloe Alexis double latex, or memory foam + latex would be better. I know when I have tried memory foam at department stores, I’ve liked the “Firm” variety, but BB, for example, only has 1 type of 4 lb memory foam to offer. Would you expect it to be more firm or more plush? How would altering the firmness of the latex layer underneath impact the memory foam layer? I actually saw 1 mattress manufacturer who says putting latex ABOVE a memory foam layer is the way to go, as it slows the speed by which memory foam breaks down (under the premise that memory foam, over time, will gradually cause you to sink deeper and deeper into it.)
Also from a budget standpoint, how important is that second layer of latex in the Aloe Alexis? That is, how would you expect a double-latex Aloe Alexis to behave vs. their single-layer Cotton Camilla or Bamboo Bliss? It’s a $400 price savings (king size) to go down to the Bamboo (Cotton Camilla being nearly half the cost), so worth asking.
Thank you!!
Hi JDMWDC,
What’s the rule with regard to “sink in” of the memory foam?
As with most things concerning mattresses … the “rules” are always about how a mattress performs not about which materials or design is “better or worse” because this depends on the person. Better and worse is always measured by how a specific mattress interacts with a specific person. Everything comes down to which mattress provides you with the best possible spinal alignment in all your sleeping positions, the best possible pressure relief in your most pressure prone positions, and has the combination of other qualities that you most prefer (ventilation and temperature regulation, motion isolation, responsiveness and resiliency, freedom or restriction of movement, feeling more “in” the mattress or “on” the mattress and many others) along with the durability of materials that will ensure that the properties of the mattress stay closer to their original specifications for a longer time than lower quality materials and the tradeoff between cost and higher performance and more durable materials and designs.
Every type of material including memory foam has many different versions or varieties that each have their own unique and different properties (you can read about some of the differences between different types of memory foam in post #9 here and post #8 here). I can only speak to the quality and value of a mattress (which has nothing to do with how it may feel and perform for a specific person) and because I have never slept on their mattresses I have no personal experience with how they feel for me (and my specific body type and sleeping style) or how they may feel for someone else. The manufacturers themselves are always the best source and are in the best position to describe how their memory foam feels and performs or how one of their mattresses as a whole may compare to others that either you or they they are familiar with.
Each different mattress design and the thickness and types of layering and other components will also make a significant difference in terms of how a mattress interacts with different types of people with different body types and sleeping styles. Heavier people, people who have a narrower waist and either wider shoulders or hips, or people who are side sleepers will sink into the top layers more deeply than lighter people or those who sleep in flatter positions (back and stomach). The middle layer is more of a transition layer and has a more “dual” role in a mattress because it “helps” with pressure relief, primary support, and secondary support and is a big part of how a mattress adapts to different people and different sleeping positions. Because latex is so adaptable and has a wider range of response between soft with initial compression where it needs to be and firmer where it needs to be with deeper compression … it is particularly useful in transition layers. In addition to this it is also a very durable material and will keep its properties for a long time and for those people who sink into the mattress past the top layer it’s durability can also play an important role in the durability of the mattress as a whole.
The middle transition layer will also lend its properties to the layers above it. If the transition layer is more resilient (and latex has much higher resilience than memory foam which has very little at all) then depending on how thick the layer above it is and on how much someone sinks into the mattress … it will “modify” the properties of the layer above it to different degrees. If the transition layer is latex and the top layer is thin enough for a particular person to “feel” the deeper layers … then the “feel” of the mattress will be more resilient and responsive to movement. If the transition layer is memory foam … then the “feel” of the mattress will be mush less resilient and responsive to movement. Memory foam tends to “restrict” movement because it absorbs energy and latex tends to “allow” movement because it is highly resilient and returns energy to the body when you move. The closer to the top of a mattress a particular layer is the more it will contribute to the overall feel and response of the mattress. “Comfort” which is what most people feel when they first lie on a mattress and is most dependent on the upper layers. Support and sleeping with your spine in a neutral alignment in all your sleeping positions over the course of the night is what most people will “feel” when they wake up in the morning (with or without stiffness and back discomfort or pain).
As you can see in post #4 here (and the posts it links to) which talks about all the factors involved in durability … this is correct and the layers above another layer will improve the durability of the layers below it.
I am also one of those who likes the combination of memory foam and latex in the comfort layers (although I prefer all latex even more) and I also prefer latex over memory foam (with a thin layer of latex over a thin layer of memory foam so that they “modify” each other more effectively than a thicker top layer would) because I prefer a more resilient sleeping surface that “allows” for more free movement on a mattress. As you mentioned this is the other way around than is most commonly found. One advantage of the Aloe Adele for example is that you can reverse the top two layers and put latex over the memory foam.
I tend to approach things from the other direction. As you can see in post #2 here which compares a latex hybrid mattress to an all latex mattress … there are clear differences between their performance levels and then the question becomes whether the higher cost of a higher performance mattress that has more costly and higher performance materials is comfortably in your budget range. Not everyone can afford the highest quality mattress available even though they would be “worth it” in terms of quality, performance, and durability. The other advantage of a mattress like the Aloe Alexis (or Aloe Adele) is that it allows you to “fine tune” both the comfort layer and the middle transition layer so it is a much more flexible design in terms of customizing a mattress to your specific needs and preferences either before or after a purchase. A forum search on aloe alexis bamboo bliss (you can just click this) will also bring up more posts with more information about how they may compare.
These are all decisions that need to be answered on an individual basis based on your own unique personal value equation and what is most important to you because nobody else can really tell you which would be better or worse or match your personal criteria in a mattress better than you.
Phoenix
Phoenix,
Comparing the Cotton Camilla to the Bamboo Bliss for a moment. What value is there between the two? From what I can tell, the difference is 2" more of the HD foam core. To me it seems like that wouldn’t be noticeable. My wife and I are about 150 lbs each, so the bottom 2" would probably be doing a very minimal job, if any job, in support. Is this reasonable or am I missing something?
Thank you!
Hi JDMWDC,
It’s usually best to ask specific questions about specs directly to the manufacturer because they have the most accurate and current information.
But since I know how these two compare for now I can answer here as well.
The Cotton Camilla is the entry level and uses a 1.5 lb polyfoam base layer vs a higher quality 2.17 lb polyfoam base layer in the Bamboo Bliss and Aloe Alexis. It also doesn’t have the higher quality cover with quilted wool in it that are in the models above the Cotton Camilla and there are only 2 comfort choices in the Cotton Camilla vs 6 with the Bamboo Bliss.
Hope this helps
Phoenix.